Enable port forwarding for the Mikrotik MIKROTIK RB951G-2HnD

1 Log in the router using your user name and password (Default-IP: 192.168.88.1, Login: admin, password: none)

2 Click "IP"

3 Click "Firewall"

4 Click "NAT"

5 Click button "Add New" to add new rule

6 Chain: dstnat

7 Protocol: tcp

8 Dst. Port: 80

9 In. Interface: ether1-gateway (one of an interface on the router)

10 Scroll page down to "Action" field

11 Action : dst-nat

12 To Addresses: 192.168.88.253 (IP address of the computer cFos Personal Net is running on)

13 To Ports: 80

14 Scroll back on top of the page and check if the rule enabled (by default it is Enabled)

15 Click "Apply"

16 Click "OK" and then logoff from the router

Port forwarding is now configured for your computer!